Africa's cotton-to-garment chain breaks in the middle. The continent grows cotton at scale, mostly on smallholder farms, and it sews garments at scale in export zones in Kenya, Madagascar, Lesotho and elsewhere. But the stages in between, spinning, weaving or knitting, and above all dyeing and finishing, are thin. The World Trade Organization reported in March 2026 that around 98% of West and Central Africa's cotton is exported as raw fibre. Meanwhile African garment factories cut mostly imported fabric. The two ends of the chain trade with Asia, not with each other.
This essay explains where and why the chain breaks, what is being built to close it, and what that means for a buyer. If you are placing a garment order and want the practical country-by-country guide, read sourcing garments from Africa instead.
The chain, stage by stage
A cotton garment passes through roughly six stages. Here is where African capacity sits at each one.
| Stage |
What happens |
African position |
| Growing |
Seed cotton harvested, mostly by smallholders |
Large. The C-4+ countries (Benin, Burkina Faso, Chad, Mali, Côte d'Ivoire) produce more than 1 million tonnes a year |
| Ginning |
Lint separated from seed |
Present wherever cotton is grown; the lint is then exported |
| Spinning |
Lint spun into yarn |
Thin; new mills under construction, notably in Benin |
| Weaving or knitting |
Yarn made into fabric |
Thin |
| Dyeing and finishing |
Fabric coloured, treated and made to spec |
The weakest link; largely missing |
| Cut, make and trim |
Fabric sewn into garments |
Established in export zones, mostly on imported fabric |
The production figure is from an Ecofin Agency analysis of the West African textile chain. The rest of this essay goes through the gaps.
Break one: lint leaves the continent
Ginning is the last stage most African cotton sees at home. UNCTAD reports that sub-Saharan African countries export more than 90% of the raw cotton lint they produce. Its figures for French-speaking Africa in 2018 are starker still: of about 1.27 million tonnes of lint, around 19,000 tonnes, or 1.5%, were processed locally. UNCTAD described integrated cotton-to-textile chains in the region as inactive or absent.
The reason is not that the cotton is poor. Much of it is sold into a global market that values it; a large share is now verified under the Cotton made in Africa standard. The CmiA 2025 verification report covers about 520,000 tonnes of lint from roughly 710,000 smallholder families, grown with 20 cotton companies in ten countries. The fibre is good enough for international brands. It simply goes to Asian spinners.
The money stays with them. UNCTAD also points out that ginning produces more cottonseed than lint, and that the seed and the plant stalks are themselves underused: Africa crushes about 75% of its cottonseed for oil and meal, and the rest, worth an estimated $237 million, goes unused.
Break two: spinning and weaving are thin
Spinning is capital-heavy. A spinning mill needs machinery, reliable power, and a steady supply of lint at a price competitive with the export price. A ginner who can sell lint for dollars today has little reason to sell it to a local spinner for local currency, and a new mill must compete for that lint with buyers who have been in the market for decades.
The machinery numbers tell the story. A UNIDO mapping cited by Ecofin found that textile machinery shipments to the C-4+ countries between 2013 and 2022 were negligible. Older mills in Côte d'Ivoire, Burkina Faso and Mali have been hard to revive.
Break three: dyeing and finishing are missing
This is the gap buyers feel most. A garment factory can import grey fabric and dye it, or import finished fabric. Without local dyeing and finishing capacity, even locally spun and woven fabric has to leave the country to be finished, or it stays in a limited range of colours and finishes.
Ecofin's analysis identifies dyeing and finishing as the stages most clearly missing, and concludes that countries making garments still depend on imported fabric as a result. Dyeing and finishing also need water treatment and chemical handling, which adds to the cost of building them.
Break four: trade rules reward the gap
The fourth break is policy, and it is the least discussed. AGOA, the US preference that built most of the export garment sector in Kenya, Lesotho and Madagascar, includes a third-country fabric provision. The Congressional Research Service describes it as extending duty-free treatment to apparel from least-developed AGOA countries even when yarn and fabric come from outside the region.
That provision made sense. Without it, there would be little AGOA apparel trade, because the regional fabric did not exist. But it also means a garment factory gets the same duty-free access whether it buys fabric from a mill next door or from one across the Indian Ocean. The cheaper, more reliable option wins, and that is usually the established Asian mill. AGOA now runs to 31 December 2028 (see what a side letter can't do), and reports on the extension say the provision continues.
Within Africa, the rules are moving the other way. The AfCFTA's outstanding rules of origin for clothing and textiles were reported adopted in early 2026, according to the AmCham South Africa AfCFTA newsletter for March 2026. Rules of origin for garments typically decide how much processing must happen inside the free trade area for the goods to qualify. For how those rules work in general, see AfCFTA rules of origin in plain language; for the AfCFTA overall, see the AfCFTA hub. Check the exact rule for your garment's HS line before you rely on a preference.
What is being built
The gap is now a policy priority, and capital is starting to move.
The Cotton Partnership. At the WTO's ministerial conference in Yaoundé in March 2026, partners launched a new phase of the Partenariat pour le Coton for the C-4+ countries. Its analysis says USD 5 billion of investment over ten years could generate around 500,000 direct jobs and about USD 6 billion of value-added products. Contributors named by the WTO include UNIDO, ITC, Afreximbank and the African Development Bank. A UNIDO-ITC assessment cited by Ecofin estimates the C-4+ countries could process up to 25% of their cotton locally within ten years. That is a target, not a forecast.
Benin's Glo-Djigbé zone. The most advanced integrated project is in Benin. According to Ecofin, phase one of the textile park at the Glo-Djigbé Industrial Zone is designed to process 40,000 tonnes of lint a year through three integrated factories, with spinning, knitting and garment capacity. Ecofin notes that this is design capacity, not verified output.
Garment-first investment. Elsewhere, investors are starting with cut-make-trim and planning to integrate backward later. Ecofin reports an IFC-backed garment project at Togo's Adétikopé Industrial Platform that starts with sewing and plans backward integration in a second phase.
None of these change the picture for a buyer placing an order in 2027. They might change it by the early 2030s.
What this means for a buyer
Lead times are set by fabric. Because most fabric is imported, an African garment order carries a fabric lead time before sewing starts. Factories that hold fabric stock or work with a nearby mill can be faster. Ask.
"Made in Africa" rarely means African cotton. If your brand story depends on African fibre, you need traceability from bale to garment, and you will probably have to nominate the fabric route yourself. Cotton verified under a standard such as CmiA exists in volume. The work is getting it through spinning and finishing that may sit in Asia and back into an African sewing room.
Trade access depends on the fabric route. Under AGOA's third-country fabric rule, fabric origin does not matter for eligible apparel. Under other agreements, including EU preferences and the AfCFTA, it may. The same garment can qualify in one market and not another.
Integrated capacity is worth watching. A buyer who wants a shorter, traceable chain should follow the Benin projects and the Cotton Partnership pipeline. An early buyer in a new mill carries start-up risk along with any advantage. Run the same checks you would on any new supplier.
The structural point
Africa's textile chain is not missing because Africa cannot grow cotton or sew garments. It does both. It is missing in the middle because each stage, taken alone, has a better short-term option outside the continent: the ginner sells lint abroad for dollars, the garment factory imports fabric under a rule that does not penalise it, and the capital for spinning and finishing has gone elsewhere. Closing the chain needs all three to change together: finance for mid-stream mills, rules of origin that reward regional fabric, and buyers who will commit volume to the result.
If you want to source cotton, yarn or garments from African producers, send us your requirement.
AfroSynergy connects international buyers with African exporters. Listings open on 15 January 2027. To source a product or find a counterparty now, send us an enquiry.