Under the African Continental Free Trade Area, a product only gets the lower AfCFTA tariff if it "originates" in a State Party. There are two ways to originate. Either the product is wholly obtained in one country (grown, mined, born and raised, fished there), or it has been sufficiently worked or processed there, which means it meets the product-specific rule for its HS code in Appendix IV to Annex 2. Simple operations such as repacking, sorting or shelling never count. On top of that, the goods must travel directly between State Parties and be backed by a valid proof of origin.
That is the whole system in one paragraph. The rest of this guide explains each piece in plain language, with worked examples, so an exporter can test a product before applying for a certificate and a buyer can judge whether a supplier's origin claim will hold at the border.
Where the rules are written down
The rules sit in a small set of documents. You will need two of them open whenever you check a product.
| Document |
What it contains |
Where to find it |
| Annex 2 on Rules of Origin |
The general rules: origin criteria, what does not confer origin, cumulation, proof of origin, verification |
Annex 2 as signed in 2018 (WTO copy) |
| Appendix IV to Annex 2 |
The product-specific rule for each HS chapter, heading or sub-heading |
Searchable in the AfCFTA e-Tariff Book under "Rules of Origin" |
| AfCFTA Rules of Origin Manual |
The Secretariat's official explanation, with worked examples |
Rules of Origin Manual, July 2022 |
One status note. For years the rules for automotive products and for textiles and clothing were unfinished. A March 2026 AfCFTA update for South African exporters, published by AmCham South Africa, reported that those outstanding rules have been adopted, so 100% of the rules of origin are now agreed, and the AU signed off on the automotive rules in February 2026. However, when we checked on 17 November 2026, the Appendix IV file offered for download on the e-Tariff Book was still the version approved in December 2023. If your product sits in HS chapters 50 to 63 or 87, confirm the current rule with your customs authority before relying on any downloaded copy.
Test 1: wholly obtained
A product is wholly obtained when it comes entirely from one State Party, with no imported material in it at all. Annex 2 lists the categories, including:
- minerals and other non-living natural resources extracted there
- plants, vegetables and fruit grown or harvested there
- live animals born and raised there, and products from them
- products of hunting, fishing and aquaculture conducted there
- scrap and waste from manufacturing there, and used articles collected there that are fit only for recovering materials
- goods made there exclusively from the items above
The Rules of Origin Manual gives clear examples. Gold mined in South Africa is wholly obtained. Maize harvested in Kenya is wholly obtained even if the seed was imported from Argentina. Copper recovered in Guinea from scrap electrical wire is wholly obtained, wherever the wire was originally made.
For most raw agricultural exports, such as cocoa beans, green coffee, raw cashew or shea nuts grown in the exporting country, this is the test you will use. Your evidence is where the crop was grown, not what was done to it.
Test 2: sufficiently worked or processed
If any imported (non-originating) material goes into the product, the product must meet the rule that Appendix IV sets for its HS code. Appendix IV uses four kinds of rule. Some products have one rule, some offer a choice of two.
| Rule type |
What it asks |
Example from the Manual |
| Change in tariff heading (CTH) or sub-heading (CTSH) |
Imported materials must be classified under a different HS heading (or sub-heading) from the finished product |
Plastic shower caps (65.06) made from imported plastic of heading 39.01 qualify; razors (8212.10) made from imported blades of 8212.20 qualify |
| Specific process |
A named process must be carried out locally |
Polished diamonds (ex 71.02) made from imported rough stones qualify, because polishing is the required process |
| Value of non-originating materials |
Imported materials must not exceed a set share of the ex-works price |
Steam boilers (84.02): imported materials must not exceed 60% of the ex-works price |
| Value added |
Local value added must reach a set share of the ex-works price |
The Manual's value-added example uses pasta (19.02) with a 40% threshold |
The thresholds are product-specific. There is no single AfCFTA percentage. The e-Tariff Book's notes add one detail worth knowing: where a chapter, heading or sub-heading is marked with an asterisk, the ceiling on non-originating materials drops automatically from 60% to 55% after five years counted from 1 January 2021. If your product carries an asterisk, use 55%.
Two definitions matter for the arithmetic, both set out in the Manual:
- Ex-works price is the price paid to the manufacturer at the factory gate, covering materials, labour, overheads and profit, minus any internal taxes refunded on export.
- Value of non-originating materials is their customs value at import on an FOB basis or, if that cannot be established, the first price paid for them in the State Party. Materials of unknown origin count as non-originating.
A worked example: the Manual's vacuum cleaner
The Manual walks through a vacuum cleaner (heading 85.08) made in State Party A. The rule for that heading: imported materials must not exceed 60% of the ex-works price.
| Cost item (currency units) |
Value |
| Chassis and other parts (local) |
15 |
| Motor (imported) |
5 |
| Filter bag (imported) |
2 |
| Other components (imported) |
3 |
| Labour |
5 |
| Overheads |
8 |
| Profit |
10 |
| Ex-works price |
48 |
Imported materials total 10, which is 21% of the ex-works price of 48 (rounded to the nearest whole number, as the Manual instructs). That is well under 60%, so the vacuum cleaner originates in State Party A. Note that labour, overheads and profit all sit inside the ex-works price. A thin-margin product with heavy imported inputs can fail a 60% test that a higher-margin version of the same product passes.
What never confers origin
Annex 2 lists operations that are too minor to make a product originate, however many of them you combine. They include:
- operations only to preserve goods during storage and transport
- breaking up or assembling packages, simple packaging into bottles, bags, boxes or cards
- washing, cleaning, simple ironing, painting or polishing
- husking, bleaching or polishing of cereals and rice
- peeling, stoning or shelling of fruit, vegetables, nuts of heading 08.01 or 08.02, and groundnuts
- simple sifting, sorting, grading or matching
- affixing marks, labels or logos
- simple mixing that causes no chemical reaction, and simple assembly of parts
- slaughter of animals
An operation is "simple" when it needs no special skills and no machines or tools made or installed specifically for it. Separately, agricultural products obtained from food aid or similar non-commercial assistance can never originate.
The practical consequence: an importer cannot bring in a product from outside Africa, repack or relabel it, and claim AfCFTA preference.
The flexibilities that help you qualify
Annex 2 and the Manual include several rules that make origin easier to reach than the headline thresholds suggest.
| Flexibility |
What it does |
| Cumulation |
All State Parties count as a single territory. Materials originating in one State Party and processed in another count as originating where the final processing happens, provided that processing goes beyond the minimal operations above. A certificate using cumulation is endorsed "CUMULATION". |
| Tolerance |
Non-originating materials that the product rule would normally forbid can still be used if their total value is no more than 15% of the ex-works price. The Manual's example is a padlock (83.01) using an imported lock mechanism of the same heading worth 10% of the price. Tolerance does not apply to textiles and clothing, chapters 50 to 63. |
| Absorption |
An intermediate product that has already gained origin counts as fully originating when used to make another product in the same country. Its own imported content is ignored. |
| Sets |
A set with some non-originating items still originates if those items are worth no more than 15% of the set's ex-works price. |
| Neutral elements |
You do not need to establish the origin of energy, fuel, plant, machinery, tools, or materials that do not end up in the product. |
Cumulation is the one buyers should understand. It is what lets a Kenyan garment maker use fabric woven in Egypt, or a Ghanaian chocolate maker use Ivorian cocoa butter, without that input counting against them, as long as the supplier can prove the input's own AfCFTA origin with a certificate, origin declaration or supplier's declaration.
Conditions after the goods are made
Origin is not the last hurdle. Annex 2 also requires:
- Direct transport. Goods must move directly between State Parties, or through other State Parties under customs supervision with no operations beyond unloading, reloading or preservation. Proof is a single transport document or a transit customs certificate.
- Territoriality. If an originating product leaves AfCFTA territory and undergoes further operations, it loses its status.
- Proof of origin. A certificate of origin, or an origin declaration on the invoice where allowed. We cover how to obtain one in how to get an AfCFTA certificate of origin.
Goods made in special economic zones were still an outstanding issue in the 2018 text. Ask your customs authority how your zone is treated before you count on preference.
Five products tested (illustrative)
These are illustrative scenarios built from the rules above, not real shipments. The verdicts depend on the current Appendix IV rule for each HS code.
| Scenario |
Test used |
Likely result |
| Cocoa beans grown in Côte d'Ivoire, exported to Morocco |
Wholly obtained |
Originates |
| Raw cashew imported from outside Africa, shelled in Ghana, exported to Nigeria |
Shelling of 08.01 nuts is listed as insufficient |
Does not originate |
| Rice imported in bulk from Asia, repacked into 5 kg bags in Kenya |
Simple packaging is insufficient |
Does not originate |
| Vacuum cleaner with 21% imported content, rule ceiling 60% |
Value of non-originating materials |
Originates |
| Cotton shirts sewn in one State Party from fabric woven in another State Party from African cotton |
Appendix IV rule for the shirt's heading, plus cumulation |
Check the current chapter 61 or 62 rule; tolerance is not available |
How to test your own product
- Classify the product correctly. Every rule hangs off the HS code, so a wrong code means the wrong rule. See HS codes for African exports.
- Find the rule. Search your heading in the e-Tariff Book's Rules of Origin tab. Where an "ex" precedes the code, the rule covers only the part of the heading described.
- Build a cost sheet for one unit: every material with its origin and value, plus labour, overheads and profit to reach the ex-works price. The Manual says costs should follow the accounting standards used where the product is made.
- Gather proof for originating inputs, such as supplier's declarations for materials bought from other State Parties.
- Keep the file. Exporters must keep the application and supporting documents for at least five years, and importers must keep their records for five years too. Customs can deny preference if records are missing or withheld.
- Check the lane is open. Origin is useless if the importing country is not yet applying its AfCFTA schedule to your product. See is your product trading under AfCFTA yet?
For the wider picture of what the agreement offers smaller firms, read AfCFTA benefits for SMEs, and for country-level context see our AfCFTA page.
Frequently asked questions
What does wholly obtained mean under AfCFTA?
It means the product comes entirely from one State Party, with no imported material in it: minerals extracted there, crops grown there, animals born and raised there, or fish caught there. Maize harvested in Kenya is wholly obtained even if the seed was imported. Most raw agricultural exports grown in the exporting country use this test.
What percentage of local content does AfCFTA require?
There is no single AfCFTA percentage. Thresholds are set product by product in Appendix IV. Steam boilers, for example, allow imported materials up to 60% of the ex-works price, while the Manual's pasta example uses a 40% value-added threshold. Where a heading carries an asterisk, the 60% ceiling drops to 55% after five years counted from 1 January 2021.
Does repacking or relabelling imported goods give them AfCFTA origin?
No. Annex 2 lists simple packaging, breaking up or assembling packages, affixing marks or labels, sorting and grading, and shelling of certain nuts among the operations too minor to confer origin, however many are combined. An importer cannot bring in a product from outside Africa, repack or relabel it, and claim AfCFTA preference.
What is the 15% tolerance rule in AfCFTA?
It lets you use non-originating materials that the product rule would normally forbid, as long as their total value is no more than 15% of the ex-works price. The Manual's example is a padlock using an imported lock mechanism of the same heading worth 10% of the price. Tolerance does not apply to textiles and clothing, chapters 50 to 63.
Can I use materials from other African countries and still qualify for AfCFTA?
Yes, through cumulation. All State Parties count as a single territory, so materials originating in one State Party and processed in another count as originating, provided the processing goes beyond the minimal operations. The supplier must prove the input's own AfCFTA origin with a certificate, origin declaration or supplier's declaration, and the certificate is endorsed "CUMULATION".
Are the AfCFTA rules of origin for textiles and cars agreed?
Yes, according to a March 2026 AmCham South Africa update, which reported that the outstanding automotive and textiles rules were adopted. But when we checked on 17 November 2026, the Appendix IV file on the e-Tariff Book was still the December 2023 version, so confirm the current rule for HS chapters 50 to 63 or 87 with your customs authority.
AfroSynergy connects international buyers with African exporters. Listings open on 15 January 2027. To source a product or find a counterparty now, send us an enquiry.