Responsible mineral sourcing from Africa means running the five-step due diligence process in the OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas before and during every supply relationship: (1) set up management systems, (2) identify and assess supply-chain risk, (3) respond to the risks you find, (4) get independent third-party audits at the right point in the chain, and (5) report publicly. For EU importers of tin, tantalum, tungsten and gold above set volumes, those five steps are a legal duty under the EU Conflict Minerals Regulation. For cobalt, lithium, graphite and nickel used in batteries, EU law adds a similar duty from August 2027.
This post is the how-to. For the supply picture (who produces what, and under which export rules), read our companion guide to Africa's critical minerals: cobalt, lithium and graphite.
The framework and the law, in one table
The OECD guidance is the reference standard. Its third edition (2016) covers tin, tantalum, tungsten and gold (3TG) "as well as all other mineral resources" (OECD). Several laws make it binding for some companies:
| Instrument |
Minerals |
Who must comply |
Status (checked 17 November 2026) |
| OECD Due Diligence Guidance (3rd ed., 2016) |
All minerals |
Voluntary; referenced by the laws below |
In force as guidance |
| EU Conflict Minerals Regulation, (EU) 2017/821 |
Tin, tantalum, tungsten, gold (ores, concentrates, metals) |
EU importers above annual volume thresholds |
Applies since 1 January 2021 (European Commission) |
| EU Batteries Regulation, (EU) 2023/1542 |
Cobalt, lithium, natural graphite, nickel |
Large operators placing batteries on the EU market |
Due diligence duties apply from 18 August 2027, after postponement by (EU) 2025/1561 |
| US Dodd-Frank Act s.1502 (SEC rule) |
Tantalum, tin, gold, tungsten |
SEC-reporting companies using them in products |
Form SD and, where needed, a Conflict Minerals Report (SEC) |
EU Conflict Minerals Regulation: thresholds that matter
The regulation applies only to importers whose annual imports of a given product exceed the thresholds in Annex I of Regulation (EU) 2017/821. Some examples:
| Product (Annex I) |
Annual import threshold |
| Tin ores and concentrates |
5,000 kg |
| Tungsten ores and concentrates |
250,000 kg |
| Tantalum or niobium ores and concentrates |
10 kg |
| Gold ores and concentrates |
10 kg |
| Unwrought gold below 99.5% purity, unrefined |
100 kg |
The thresholds are set to capture at least 95% of EU imports of each product, so most commercial importers of African tantalum or gold ore are in scope. Recycled metals are exempt, but an importer relying on that must publicly say so and describe its checks (Article 7(4)). Member state authorities enforce the rules and can inspect documents and audit reports (European Commission).
Cobalt, lithium and graphite are not covered by the Conflict Minerals Regulation. If you buy them, the legal hook in Europe is the Batteries Regulation from August 2027, but the OECD guidance applies today and most downstream customers already expect it.
Step 1: Set up management systems
Before you place an order, build the internal machinery. The OECD guidance and Article 4 of the EU regulation both require:
- A written supply-chain policy consistent with the OECD's Annex II model policy, published and communicated to suppliers. Annex II lists the risks you commit not to contribute to: the worst forms of child labour, forced labour, torture and other serious human-rights abuses, direct or indirect support to non-state armed groups, and bribery and fraudulent misrepresentation of origin, among others.
- A named senior owner with authority to stop a purchase.
- Traceability records kept for at least five years (EU Article 4). For ores and concentrates: country of origin, supplier name and address, and quantities and extraction dates where available. For metals: names and addresses of the smelters and refiners in your chain.
- A grievance mechanism so workers, communities or NGOs can raise concerns.
- Contract clauses that bind suppliers to your policy, give you information and audit rights, and let you suspend or exit.
In practice for an African purchase: put the policy, the information requirements and the audit right into the purchase contract itself. A supplier who will not sign them is giving you your first risk signal.
Step 2: Identify and assess risk
Risk assessment answers two questions: does the mineral come from, or pass through, a conflict-affected or high-risk area (CAHRA), and are there red flags in the supply chain?
Check the location. The European Commission publishes an indicative, non-exhaustive CAHRA list. It is a starting point, not a safe harbour: you remain responsible for areas not on the list (EU Article 14).
Collect origin evidence. For an African mineral that typically means:
| Document |
What it tells you |
| Mining licence or permit (national mining cadastre) |
The source mine exists and is authorised |
| Export licence or permit, plus any quota allocation |
The material can lawfully leave the country |
| Chain-of-custody records (bags, tags, lot numbers) |
Material was not mixed with other origins |
| Assay or certificate of analysis |
Grade and composition match the claimed origin |
| Transport and customs documents |
Route and border crossings match the story |
| Company registration and ownership |
Who you are actually paying; see our guide to checking an African company from overseas |
Look for red flags. Typical ones in African mineral trade: a declared origin with little or no known production of that mineral; a transit country exporting more than it produces; unexplained intermediaries or cash payments; and prices well below market.
The transit-country flag is not theoretical. In July 2025, UN experts said Rwanda's reported tantalum, tin and tungsten production figures were inflated to conceal minerals smuggled from eastern DRC, which Rwanda denied (AP via WSLS, 4 July 2025). An earlier UN report found M23 rebels exported at least 150 t of coltan from the Rubaya area to Rwanda in 2024 (Mining Weekly, 9 January 2025). If your tantalum is declared as Rwandan, your risk assessment has to address that evidence.
Step 3: Respond to identified risks
The OECD guidance gives three responses, chosen by severity:
- Continue trading while mitigating measurable risks, with a time-bound improvement plan agreed with the supplier.
- Suspend temporarily while mitigation is pursued.
- Disengage where mitigation fails or where you find the most serious risks, such as direct or indirect support to non-state armed groups.
Report the findings and your chosen response to the senior owner named in Step 1 (EU Article 5). Disengaging by reflex is not the expected default. The guidance favours engagement where improvement is achievable, including in artisanal supply.
In practice: write the improvement plan with measurable milestones (for example, a mine-site assessment by a set date, or delivery of chain-of-custody records for every lot), and make continued orders conditional on meeting them.
Step 4: Independent third-party audit
The audit verifies due diligence at the "choke point" in the chain, which for metals is the smelter or refiner. Under EU Article 6, an importer of ores and concentrates must have its due diligence audited by an independent third party. A metals importer is exempt if it can show that all smelters and refiners in its chain comply with the regulation, or that it sources only from smelters on the Commission's list of global responsible smelters and refiners (Article 9).
Most buyers meet this step through industry schemes. The Responsible Minerals Initiative's Responsible Minerals Assurance Process (RMAP) uses independent assessors to check smelters and refiners and publishes lists of conformant facilities. Ask any supplier of refined metal which smelter produced it and check that facility's status yourself.
If you buy ore or concentrate directly from an African exporter, there is usually no smelter audit to rely on yet. In that case the audit duty sits with you, and the cost belongs in your pricing.
Step 5: Report
The final step is public reporting. EU Article 7 requires importers to report annually on their due diligence policies and practices, including a summary of audits, and to provide audit reports to authorities on request. US SEC filers report on Form SD. Even if you are not legally required to report, a short annual disclosure is what downstream customers now expect.
A useful report states the policy, the countries and supplier types in the chain, the risks found, the responses taken, and the audit outcomes. It does not need to name suppliers.
Applying it to battery minerals
For cobalt, lithium and graphite, the same five steps apply. Three points are specific to African supply:
- Export rules are part of the risk assessment. The DRC allocates cobalt exports by quota and bans copper and cobalt concentrate exports; Zimbabwe licenses lithium concentrate exports ahead of a planned January 2027 ban. A shipment that breaches an export rule is a legal and reputational risk. The supply guide sets out the current rules.
- Artisanal supply needs a mine-site view. Where material may come from artisanal and small-scale mining, desk research is not enough. Budget for on-the-ground assessment.
- Plan for August 2027. Large operators placing batteries on the EU market will need a due diligence policy covering these minerals from 18 August 2027 (Regulation (EU) 2025/1561). Building the OECD process now is the cheapest way to be ready.
What an African exporter should have ready
If you sell minerals to international buyers, you can shorten every negotiation by preparing a due diligence pack before you are asked:
| Item |
Notes |
| Company registration, ownership and director details |
Buyers will run KYC; see KYC in Africa |
| Mining and export licences, and current quota allocation |
Copies with validity dates |
| Your own supply-chain policy aligned with OECD Annex II |
Signed by a director |
| Chain-of-custody procedure and sample records |
Show lot-level traceability |
| Recent assay certificates |
From a recognised laboratory |
| Any prior audit or assessment reports |
Including findings and corrective actions |
Common mistakes
- Treating a certificate of origin as due diligence. It is one input to Step 2, not the process.
- Relying on the CAHRA list alone. It is indicative and non-exhaustive by design.
- Skipping Step 4 because the volume is small. EU thresholds for tantalum and gold ore are only 10 kg.
- Assuming cobalt is out of scope because it is not 3TG. The OECD guidance covers all minerals, and EU battery rules arrive in 2027.
Bottom line
The OECD five steps are not a form to fill in once. They are a management cycle: policy, risk assessment, response, audit, report, repeated for each supplier and reviewed as conditions change. For African minerals, the hardest part is Step 2, because origin evidence is scattered across licences, export permits and chain-of-custody records. Build those requests into your contracts from the first order and the rest of the process follows.
For the minerals and sectors we cover, see /sectors.
AfroSynergy connects international buyers with African exporters. Listings open on 15 January 2027. To source a product or find a counterparty now, send us an enquiry.